Snippet content copied to clipboard.
Are you sure to delete this snippet? No, don't delete
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [ 0.000000] Linux version 5.10.107 (aholmes@astraea-lnx) (aarch64-openwrt-linux-musl-gcc (OpenWrt GCC 11.2.0 r19242-5727416836e) 11.2.0, GNU ld (GNU Binutils) 2.37) #0 SMP Sat Mar 26 14:02:27 2022
  3. [ 0.000000] Machine model: Marvell Armada 3720 ECK Board
  4. [ 0.000000] earlycon: ar3700_uart0 at MMIO 0x00000000d0012000 (options '')
  5. [ 0.000000] printk: bootconsole [ar3700_uart0] enabled
  6. [ 0.000000] efi: UEFI not found.
  7. [ 0.000000] Zone ranges:
  8. [ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
  9. [ 0.000000] DMA32 empty
  10. [ 0.000000] Normal empty
  11. [ 0.000000] Movable zone start for each node
  12. [ 0.000000] Early memory node ranges
  13. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000003ffffff]
  14. [ 0.000000] node 0: [mem 0x0000000004000000-0x00000000041fffff]
  15. [ 0.000000] node 0: [mem 0x0000000004200000-0x000000003fffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000003fffffff]
  17. [ 0.000000] On node 0 totalpages: 262144
  18. [ 0.000000] DMA zone: 4096 pages used for memmap
  19. [ 0.000000] DMA zone: 0 pages reserved
  20. [ 0.000000] DMA zone: 262144 pages, LIFO batch:63
  21. [ 0.000000] psci: probing for conduit method from DT.
  22. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  23. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  24. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  25. [ 0.000000] psci: SMC Calling Convention v1.0
  26. [ 0.000000] percpu: Embedded 16 pages/cpu s28248 r8192 d29096 u65536
  27. [ 0.000000] pcpu-alloc: s28248 r8192 d29096 u65536 alloc=16*4096
  28. [ 0.000000] pcpu-alloc: [0] 0 [0] 1
  29. [ 0.000000] Detected VIPT I-cache on CPU0
  30. [ 0.000000] CPU features: detected: GIC system register CPU interface
  31. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048
  32. [ 0.000000] Kernel command line: console=ttyMV0,115200 earlycon=ar3700_uart,0xd0012000 mtdparts=spi0.0:1M(nor-flash) root=/dev/mmcblk0p1 rw rootwait
  33. [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
  34. [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
  35. [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
  36. [ 0.000000] Memory: 1014196K/1048576K available (8256K kernel code, 878K rwdata, 2068K rodata, 512K init, 284K bss, 34380K reserved, 0K cma-reserved)
  37. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  38. [ 0.000000] rcu: Hierarchical RCU implementation.
  39. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  40. [ 0.000000] Tracing variant of Tasks RCU enabled.
  41. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
  42. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  43. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  44. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  45. [ 0.000000] GICv3: 192 SPIs implemented
  46. [ 0.000000] GICv3: 0 Extended SPIs implemented
  47. [ 0.000000] GICv3: Distributor has no Range Selector support
  48. [ 0.000000] GICv3: 16 PPIs implemented
  49. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000d1d40000
  50. [ 0.000000] random: get_random_bytes called from start_kernel+0x3a8/0x57c with crng_init=0
  51. [ 0.000000] arch_timer: cp15 timer(s) running at 12.50MHz (phys).
  52. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x2e2049cda, max_idle_ns: 440795202628 ns
  53. [ 0.000004] sched_clock: 56 bits at 12MHz, resolution 80ns, wraps every 4398046511080ns
  54. [ 0.008364] Calibrating delay loop (skipped), value calculated using timer frequency.. 25.00 BogoMIPS (lpj=125000)
  55. [ 0.018958] pid_max: default: 32768 minimum: 301
  56. [ 0.023813] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  57. [ 0.031362] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
  58. [ 0.040699] rcu: Hierarchical SRCU implementation.
  59. [ 0.045714] dyndbg: Ignore empty _ddebug table in a CONFIG_DYNAMIC_DEBUG_CORE build
  60. [ 0.053628] EFI services will not be available.
  61. [ 0.058377] smp: Bringing up secondary CPUs ...
  62. [ 0.063324] Detected VIPT I-cache on CPU1
  63. [ 0.063359] GICv3: CPU1: found redistributor 1 region 0:0x00000000d1d60000
  64. [ 0.063404] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  65. [ 0.063498] smp: Brought up 1 node, 2 CPUs
  66. [ 0.085556] SMP: Total of 2 processors activated.
  67. [ 0.090391] CPU features: detected: 32-bit EL0 Support
  68. [ 0.095682] CPU features: detected: CRC32 instructions
  69. [ 0.101004] CPU features: emulated: Privileged Access Never (PAN) using TTBR0_EL1 switching
  70. [ 0.109572] CPU: All CPU(s) started at EL2
  71. [ 0.113784] alternatives: patching kernel code
  72. [ 0.121106] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  73. [ 0.131195] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
  74. [ 0.138269] pinctrl core: initialized pinctrl subsystem
  75. [ 0.144098] DMI not present or invalid.
  76. [ 0.148452] NET: Registered protocol family 16
  77. [ 0.153383] DMA: preallocated 128 KiB GFP_KERNEL pool for atomic allocations
  78. [ 0.160629] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
  79. [ 0.168568] DMA: preallocated 128 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
  80. [ 0.177063] thermal_sys: Registered thermal governor 'step_wise'
  81. [ 0.177463] cpuidle: using governor ladder
  82. [ 0.187952] ASID allocator initialised with 65536 entries
  83. [ 0.215414] cryptd: max_cpu_qlen set to 1000
  84. [ 0.221757] SCSI subsystem initialized
  85. [ 0.225764] libata version 3.00 loaded.
  86. [ 0.225995] usbcore: registered new interface driver usbfs
  87. [ 0.231675] usbcore: registered new interface driver hub
  88. [ 0.237140] usbcore: registered new device driver usb
  89. [ 0.244628] clocksource: Switched to clocksource arch_sys_counter
  90. [ 0.251548] NET: Registered protocol family 2
  91. [ 0.256160] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
  92. [ 0.264498] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
  93. [ 0.273067] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
  94. [ 0.281077] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
  95. [ 0.288576] TCP: Hash tables configured (established 8192 bind 8192)
  96. [ 0.295181] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
  97. [ 0.301936] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
  98. [ 0.309335] NET: Registered protocol family 1
  99. [ 0.313756] PCI: CLS 0 bytes, default 64
  100. [ 0.319199] workingset: timestamp_bits=46 max_order=18 bucket_order=0
  101. [ 0.329403] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  102. [ 0.335353] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  103. [ 0.351749] mv_xor d0060900.xor: Marvell shared XOR driver
  104. [ 0.435338] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  105. [ 0.515341] mv_xor d0060900.xor: Marvell XOR (Descriptor Mode): ( xor cpy intr )
  106. [ 0.523013] debugfs: Directory 'd0060900.xor' with parent 'dmaengine' already present!
  107. [ 0.531308] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  108. [ 0.539289] cacheinfo: Unable to detect cache hierarchy for CPU 0
  109. [ 0.549170] loop: module loaded
  110. [ 0.555278] spi-nor spi0.0: gd25lq80c (1024 Kbytes)
  111. [ 0.560422] 1 fixed-partitions partitions found on MTD device spi0.0
  112. [ 0.567038] Creating 1 MTD partitions on "spi0.0":
  113. [ 0.571890] 0x000000000000-0x000000100000 : "nor"
  114. [ 0.581955] orion-mdio d0032004.mdio: Cannot register MDIO bus (-16)
  115. [ 0.588522] orion-mdio: probe of d0032004.mdio failed with error -16
  116. [ 0.595701] mvneta: register 0x243c original value: 0
  117. [ 0.600826] mvneta: register 0x243c modified value: 70000000
  118. [ 0.607459] mvneta d0030000.ethernet eth0: Using random mac address 8a:66:d2:3d:00:f2
  119. [ 0.615726] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  120. [ 0.622376] ehci-pci: EHCI PCI platform driver
  121. [ 0.627022] ehci-platform: EHCI generic platform driver
  122. [ 0.632480] ehci-orion: EHCI orion driver
  123. [ 0.636819] orion-ehci d005e000.usb: EHCI Host Controller
  124. [ 0.642317] orion-ehci d005e000.usb: new USB bus registered, assigned bus number 1
  125. [ 0.650225] orion-ehci d005e000.usb: irq 23, io mem 0xd005e000
  126. [ 0.694743] orion-ehci d005e000.usb: USB 2.0 started, EHCI 1.00
  127. [ 0.701198] hub 1-0:1.0: USB hub found
  128. [ 0.705031] hub 1-0:1.0: 1 port detected
  129. [ 0.710071] usbcore: registered new interface driver usb-storage
  130. [ 0.716412] i2c /dev entries driver
  131. [ 0.720709] armada_37xx_wdt d0008300.watchdog: Initial timeout 120 sec
  132. [ 0.727866] sdhci: Secure Digital Host Controller Interface driver
  133. [ 0.734160] sdhci: Copyright(c) Pierre Ossman
  134. [ 0.738801] sdhci-pltfm: SDHCI platform and OF driver helper
  135. [ 0.744759] leds-gpio gpio-leds: there is not valid maps for state default
  136. [ 0.753602] NET: Registered protocol family 10
  137. [ 0.759087] Segment Routing with IPv6
  138. [ 0.762832] NET: Registered protocol family 17
  139. [ 0.767421] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  140. [ 0.770849] mmc0: SDHCI controller on d00d8000.sdhci [d00d8000.sdhci] using ADMA
  141. [ 0.780938] 8021q: 802.1Q VLAN Support v1.8
  142. [ 0.796406] d0012000.serial: ttyMV0 at MMIO 0xd0012000 (irq = 0, base_baud = 1562500) is a mvebu-uart
  143. [ 0.805885] printk: console [ttyMV0] enabled
  144. [ 0.814621] printk: bootconsole [ar3700_uart0] disabled
  145. [ 0.833174] xhci-hcd d0058000.usb: xHCI Host Controller
  146. [ 0.838625] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 2
  147. [ 0.846390] xhci-hcd d0058000.usb: hcc params 0x0a000998 hci version 0x100 quirks 0x0000000000010090
  148. [ 0.852144] mmc0: new HS400 MMC card at address 0001
  149. [ 0.855871] xhci-hcd d0058000.usb: irq 22, io mem 0xd0058000
  150. [ 0.856459] hub 2-0:1.0: USB hub found
  151. [ 0.865048] mmcblk0: mmc0:0001 4FTE4R 3.64 GiB
  152. [ 0.866930] hub 2-0:1.0: 1 port detected
  153. [ 0.871000] mmcblk0boot0: mmc0:0001 4FTE4R partition 1 4.00 MiB
  154. [ 0.875654] xhci-hcd d0058000.usb: xHCI Host Controller
  155. [ 0.880234] mmcblk0boot1: mmc0:0001 4FTE4R partition 2 4.00 MiB
  156. [ 0.885621] xhci-hcd d0058000.usb: new USB bus registered, assigned bus number 3
  157. [ 0.891063] mmcblk0rpmb: mmc0:0001 4FTE4R partition 3 512 KiB, chardev (249:0)
  158. [ 0.897100] xhci-hcd d0058000.usb: Host supports USB 3.0 SuperSpeed
  159. [ 0.897176] usb usb3: We don't know the algorithms for LPM for this host, disabling LPM.
  160. [ 0.905495] mmcblk0: p1 p2 p3 p4
  161. [ 0.913034] hub 3-0:1.0: USB hub found
  162. [ 0.918894] mmcblk0: p4 size 7200768 extends beyond EOD,
  163. [ 0.927099] hub 3-0:1.0: 1 port detected
  164. [ 0.930474] truncated
  165. [ 0.935012] armada-37xx-rwtm-mailbox d00b0000.mailbox: Secure processor not ready
  166. [ 0.954058] turris-mox-rwtm firmware:armada-3700-rwtm: Cannot read board information: -5
  167. [ 0.962449] armada-37xx-rwtm-mailbox d00b0000.mailbox: Secure processor not ready
  168. [ 0.970309] turris-mox-rwtm firmware:armada-3700-rwtm: Firmware does not support the GET_RANDOM command
  169. [ 0.980081] turris-mox-rwtm: probe of firmware:armada-3700-rwtm failed with error -5
  170. [ 0.997443] VFS: Mounted root (squashfs filesystem) readonly on device 179:1.
  171. [ 1.005981] Freeing unused kernel memory: 512K
  172. [ 1.044893] Run /sbin/init as init process
  173. [ 1.049119] with arguments:
  174. [ 1.049122] /sbin/init
  175. [ 1.049124] with environment:
  176. [ 1.049127] HOME=/
  177. [ 1.049130] TERM=linux
  178. [ 1.049133] mtdparts=spi0.0:1M(nor-flash)
  179. [ 1.269783] init: Console is alive
  180. [ 1.273465] init: - watchdog -
  181. [ 1.447112] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  182. [ 1.467829] gpio-keys gpio-keys: there is not valid maps for state default
  183. [ 1.476845] ehci-fsl: Freescale EHCI Host controller driver
  184. [ 1.485304] usbcore: registered new interface driver uas
  185. [ 1.491057] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  186. [ 1.499839] init: - preinit -
  187. [ 1.704151] random: fast init done
  188. [ 1.909674] random: jshn: uninitialized urandom read (4 bytes read)
  189. [ 1.932831] random: jshn: uninitialized urandom read (4 bytes read)
  190. [ 1.957022] random: jshn: uninitialized urandom read (4 bytes read)
  191. [ 2.016765] mvneta d0030000.ethernet eth0: configuring for fixed/rgmii link mode
  192. [ 2.025709] mvneta d0030000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
  193. [ 2.034826] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  194. [ 6.188737] urandom_read: 2 callbacks suppressed
  195. [ 6.188744] random: procd: uninitialized urandom read (4 bytes read)
  196. [ 6.264893] F2FS-fs (loop0): Mounted with checkpoint version = 5ccce284
  197. [ 6.272505] mount_root: switching to f2fs overlay
  198. [ 6.278709] overlayfs: "xino" feature enabled using 32 upper inode bits.
  199. [ 6.316834] mmcblk0p1: Can't mount, would change RO state
  200. [ 6.326201] /dev/mmcblk0p1: Can't open blockdev
  201. [ 6.340375] urandom-seed: Seeding with /etc/urandom.seed
  202. [ 6.439229] EXT4-fs (mmcblk0p4): recovery complete
  203. [ 6.444208] EXT4-fs (mmcblk0p4): mounted filesystem with ordered data mode. Opts: (null)
  204. [ 6.471540] mvneta d0030000.ethernet eth0: Link is Down
  205. [ 6.496581] procd: - early -
  206. [ 6.499709] procd: - watchdog -
  207. [ 6.686928] random: jshn: uninitialized urandom read (4 bytes read)
  208. [ 6.786616] random: jshn: uninitialized urandom read (4 bytes read)
  209. [ 7.085082] procd: - watchdog -
  210. [ 7.090341] procd: - ubus -
  211. [ 7.170514] procd: - init -
  212. [ 7.438402] urngd: v1.0.2 started.
  213. [ 7.470234] kmodloader: loading kernel modules from /etc/modules.d/*
  214. [ 7.472646] random: crng init done
  215. [ 7.480378] random: 2 urandom warning(s) missed due to ratelimiting
  216. [ 7.501755] usbcore: registered new interface driver usbserial_generic
  217. [ 7.508700] usbserial: USB Serial support registered for generic
  218. [ 7.516257] usbcore: registered new interface driver ch341
  219. [ 7.521995] usbserial: USB Serial support registered for ch341-uart
  220. [ 7.529623] usbcore: registered new interface driver cp210x
  221. [ 7.535515] usbserial: USB Serial support registered for cp210x
  222. [ 7.542985] usbcore: registered new interface driver ftdi_sio
  223. [ 7.549072] usbserial: USB Serial support registered for FTDI USB Serial Device
  224. [ 7.586205] kmodloader: done loading kernel modules from /etc/modules.d/*
  225. [ 11.155768] mvneta d0030000.ethernet eth0: configuring for fixed/rgmii link mode
  226. [ 11.164359] mvneta d0030000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off
  227. [ 11.169767] br-lan: port 1(eth0) entered blocking state
  228. [ 11.178090] br-lan: port 1(eth0) entered disabled state
  229. [ 11.183797] device eth0 entered promiscuous mode
  230. [ 11.225571] br-lan: port 1(eth0) entered blocking state
  231. [ 11.231008] br-lan: port 1(eth0) entered forwarding state
  232. [ 12.204730] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready

Edit this Snippet